HTI HT-102 Instruction Manual page 7

11. Video Recording
Click the "
recording video, click the button again to stop recording video,
and the recorded video will be automatically saved to the
phone.
12. Picture/Video Viewing
Click the "
preview interface, click the picture or video you want to view.
Failure and Solution
If there is a disconnection during the use and no image is
displayed, you can try the following methods:
1. Close the "Thermal Viewer" software and reopen it.
2. Unplug the thermal imager and reconnect it to the phone.
3. Turn off your phone and restart it before connecting the
thermal imager.
4. Check your phone setting and set your phone to enable
power supply for external devices.
" button at the bottom of the screen to start
" button at the bottom of the screen to enter the
8