Unit.description; Specifications - Shindaiwa 68907-94311 Owner's/Operator's Manual

Unit Description
Handle
Recoil/
Starter
Air Cleaner
Cover
Fuel
Primer
Bulb
Figure 3
Prior to Assembly
Using.Figure.3.as.a.guide,.familiarize.your-
self.with.the.blower.and.its.components..
Understanding.the.unit.helps.ensure.top.
performance,.longer.service.life,.and.safer.
operation.

Specifications

Model....................................................................................................................EB510..........................................
Dry.Weight.(without.Blower.Tubes).........................................................4.9.kg.(10.8.lb.)
Dimensions.(LxWxH)......................................................................................................896.x.55.x.373.mm.(.35.x.10.x.15.in.)
Engine.type........................................................................................................4.cycle.air-cooled.gasoline.engine,.vertical.cylinder
Bore.&.Stroke.......................................................................................34.x.7.mm.(1.3.x.1.1.in.)...........................................
Displacement.............................................................................................4.5..cm
-1
Max.Output/min ........................................................................0.8.kW/1.1hp.@.7,500.min
Fuel/oil.ratio...........................................................................................................50:1.with.Shindaiwa.Premium.-cycle.mixing.oil
Carburetor.........................................................................................................................Walbro.rotary-type.with.primer.bulb
Ignition...............................................................................................................................CDI.(Capacitor.Discharge.Ignition)
Spark.Plug.............................................................................................................................................NGK.CMR5H
Starting..................................................................................................................................................Recoil.Starter
Stopping....................................................................................................................................Slide.Switch.(Grounding.type)
Fuel.Tank.Capacity................................................................................................................................0.6.L.(0.0.oz)...........................
Exhaust..........................................................................................................................................Spark.Arrester.Muffler..................
Air.Filtration..........................................................................................................................................Dry.Element
Specifications.are.subject.to.change.without.notice.
Throttle
Limiter Lever
Exhaust
Fuel Filler
Cap
Before.assembling.the.blower,.make.
sure.you.have.all.required.components..
n. Power.unit.and.blower.assembly.
n. This.Owner's/Operator's.Manual..
and.a.tool.kit.containing.a.tool.bag..
and.a.combination.spark.plug..
wrench/screwdriver.
Throttle
Safety and Operation Information Labels:
Lever
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
Nozzle
(Standard on
EB3410 and EB2510)
Blower Tube
3
(1.5.cu..in.)....................................................
-1
.(rpm)
IMPORTANT!
Carefully.inspect.all.components.for.damage.
IMPORTANT!
The terms "left", "left-hand", "LH"; "right",
"right-hand", and "RH"; "front" and "rear"
refer to directions as viewed by the
operator during normal operation.
EB3410
5.1.kg.(11..lb.)
38.x.30.mm.(1.50.x.1.18.in.)
3.
34.cm .(.07.cu..in.)
1.0.kW/1.4.hp.@.8,000.min
-1
(rpm)
5