Presetting Radio Stations - Sherwood TX-5090C Operating Instructions Manual

PRESETTING RADIO STATIONS

You can store up to 30 preferred stations in the memory.
Tune in the desired station with auto or
1
manual tuning.
Example)When memorizing FM broadcast
of 91.9MHz in preset memory.
ST TUNED
Select the desired preset number.
3
ST TUNED
When using the PRESET NUMERIC buttons on the
front panel,
Example)When selecting "9" : 9
When selecting "12" : 1
If "MEM" goes off, start from the step 2 again.
MHz
MEM
MHz
2
within 2 sec.
10
Press the MEMORY button.
2
ST TUNED
"MEM" indicator flickers for 5 seconds.
Press the MEMORY button to memorize.
4
When selecting the PRESET NUMERIC buttons, the
station is memorized automatically without
pressingthe "MEMORY" button.
Repeat steps 1~4 to memorize other
5
stations.
A stored frequency is erased from the memory by
storing another frequency in its place.
If the electricity fails or the AC input cord is
disconnected for about 2 weeks, the memorized
contents are all cleared. Should this happen, memorize
them again.
MEM
MHz