Ericsson T60d User Manual page 64

- Customized settings to simplify browsing. Each
Profile
profile has its own settings such as gateway number,
homepage, password, and name.
GSM Data - Your bearer for WAP Services. GSM Data,
also called Circuit Switched Data, provides transmission
rates up to 9.6 k/bits per second.
Preparing Your Phone for WAP
Before you can start using the WAP browser, you need to
make sure that your access settings are set correctly. You
need to set up your User ID and WAP Gateway address.
Depending on your network operator, you can receive
the access settings you need in different ways.
• When you buy your phone together with a WAP
subscription. Your operator has already entered all
the WAP settings you need.
• Over the air via SMS. Your operator sends you a text
message with the access settings you need. When this
happens you will be asked if you want to install the
settings and specify which WAP profile you want
them to apply to.
60
Note! Always make sure who the sender of the message is
before you install any settings. If you are unsure,
choose not to install any settings by pressing
• Manually. Your operator provides you with the set-
tings you need. You can then enter them yourself.
Entering the WAP Settings Manually
The WAP settings you enter will be associated with one
of the WAP profiles. If you want to use more than one
WAP profile, you need to specify the settings for each
profile. See "Using WAP Profiles" on page 64.
Note! Please refer to the information provided by your
operator before you enter your settings.
Setting up a Data Connection
1
WAP SERVICES
2 Select a WAP profile >
3 >
Access
YES
> .
YES
4 Enter the User ID to your WAP gateway >
5 Select
Password
> > >
WAP Settings
YES
.
YES
> > >
WAP Gateway
YES
> .
YES
.
NO
.
YES
User ID
.
YES