Table of Contents
Advertisement
1 Scroll to S
ETTINGS
,
commands
YES
2 Enter the first letter of the contact name and press
.
YES
3 Select a contact and press
4 Follow the instructions in the display.
Note! An icon appears next to the contact names which
have a voice command.
Caller Name
You can choose whether you want to hear the recorded
voice command for a name when you receive an
incoming call.
1 Scroll to S
ETTINGS
,
,
settings
Caller name
YES
2 Select
or
On
Off.
Voice Dialing
Voice Activated Dialing
1 From standby, press and hold
tone.
54
,
,
,
Voice control
YES
YES
,
,
,
Contacts
Add voice
YES
.
YES
,
,
,
Voice control
YES
YES
,
.
YES
until you hear a
YES
,
2 Release
Voice
,
.
name, for example "John". The name is played back
YES
to you.
3 If you have saved several numbers for that contact:
After a second tone, say a number type that you
have recorded earlier, for example "home". The
number type is played back to you, and the call is
connected.
Note! Only the number types available for that contact
are played to you. Other and Fax number types are
not available for voice dialing.
From standby, you can also initiate voice dialing, voice
profiles and voice control of voice memos by:
,
Voice
• sliding and holding the volume key.
• pressing and holding the handsfree button (when
using a portable handsfree or a Bluetooth headset).
• saying the magic word. See "The Magic Word" on
page 56.
Voice Digit Dialing
, lift the phone to your ear and say a
YES
Voice Command
Advertisement
Table of Contents
