Recording - Sherwood Newcastle R-963 Operating Instructions Manual

RECORDING

The analog signals from the 7.1 CH DIRECT inputs as well as the digital signals from the coaxial or optical
digital input can be heard but cannot be recorded.
The volume, tone (bass, treble) settings,etc. have no effect on the recording signals.
Recording with TAPE MONITOR
Select the desired input as recording source
1
except TAPE MONITOR.
AUDIO VIDEO
or
Be sure that "TAPE MON" goes off.
Dubbing from video components onto
VIDEO 1
Select VIDEO 2, VIDEO 3, VIDEO 4 or
1
VIDEO 5 as a recording source.
VIDEO
or
Dubbing the sound and image signals
separately onto VIDEO 1
Example) When dubbing the VIDEO 2 image signal
and the CD sound signal separately onto
VIDEO 1.
Select VIDEO 2 as a image recording
1
source.
VIDEO
or
Image source Sound source
POWER
OSD
OFF
POWER
OSD
OFF
POWER
OSD
OFF
Start recording on the component hooked
2
up to TAPE MONITOR.
Start play on the desired input.
3
For tape monitor function, refer to "TAPE MONITOR
function" on page 18.
Start recording on the component hooked
2
up to VIDEO 1.
Start play on the component hooked up
3
to VIDEO 2, VIDEO 3, VIDEO 4 or
VIDEO 5.
The audio and video signals from the VIDEO 2,
VIDEO 3, VIDEO 4 or VIDEO 5 component will be
dubbed onto the VIDEO 1 and you can enjoy them on
the TV set and from the speakers.
Select CD as the sound recording source.
2
AUDIO
or
Image source
30
POWER
OSD
OFF
Sound source