Wall Mounting - Onn ONA18SB001 Instruction Manual

Wall Mounting

•
personal injury and property damage (if you intend to install this product yourself, you must check
for installations such as electrical wiring and plumbing that may be buried inside the wall). It is the
installer's responsibility to verify that the wall will safely support the total load of the Soundbar.
• Additional tools (not included) are required for the installation.
• Do not overtighten screws.
• Keep this instruction manual for future reference.
•
1. Drill 2 parallel holes (Ø 8 mm each according to wall type) in the wall. The distance
between the holes should be 280 mm.
2.
Dowel
3. Insert 1 screw TA 4*40mm(not included)into each dowel. Be sure to leave a 6mm gap
between the wall and the screw's head. Lift the unit over the heads of the screws
slot i nto place.
280 mm
Wall (Front view)
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
6 mm
40-45 mm
and