Matek Systems F722-WING Quick Start Manual
  1. Manuals
  2. Brands
  3. Matek Systems Manuals
  4. Controller
  5. F722-WING
  6. Quick start manual

Matek Systems F722-WING Quick Start Manual

Flight controller
Hide thumbs
1
2
3

Advertisement

Table of Contents

FLIGHT CONTROLLER F722-WING
QUICK START GUIDE
MCU: 216MHz STM32F722RET6
IMU: MPU6000 (SPI)
Baro: BMP280 (I2C)
OSD: AT7456E (SPI)
Blackbox: MicroSD card slot (SPI)
5x Uarts (1,2,3,4,6) with built-in inversion
1x Softserial_Tx option
2x Motors & 6x Servos outputs
1x I2C
4x ADC (VBAT, Current, RSSI, AirSpeed)
Switchable Dual Camera Inputs
Switchable 5V/9V for Camera/VTX
9~36V DC IN (3~8S LiPo)
High-precision Current Sense 132A Range
BEC 5V 2A for FC
BEC 9V 2A for camera/VTX, 12V option
BEC Vx 5A for servos, 5V, 6V or 7.2V option
LDO 3.3V 200mA
Dec.2018 Rev 1.0
www.mateksys.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F722-WING and is the answer not in the manual?

Questions and answers

Related Manuals for Matek Systems F722-WING

Summary of Contents for Matek Systems F722-WING

  • Page 1 FLIGHT CONTROLLER F722-WING QUICK START GUIDE MCU: 216MHz STM32F722RET6 IMU: MPU6000 (SPI) Baro: BMP280 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD card slot (SPI) 5x Uarts (1,2,3,4,6) with built-in inversion 1x Softserial_Tx option 2x Motors & 6x Servos outputs 1x I2C...
  • Page 2 LAYOUT + & - : Battery & ESC power pads, 9~36V DC(3~8S LIPO). S7/S8: ESC signal for motor 1 & 2 G: ESC signal ground N: No circuit on this pad Voltage meter scale: 1100 Current Sensor: 132A (Scale 250) Vx= 5V (default) 0m50 Vx= 6V...
  • Page 3 Target INAV/BetaFlight: MATEKF722SE *** CLI defaults after reflashing Wiring (INAV Airplane) Airplane S7 & S8 for motors S1/S2/S3/S4/S5/S6 for servos Analog Analog Airspeed Digital 3.3V Airspeed Bluetooth Enable MSP on UART1 SBUS SBUS SDA SCL G VCC PPM/IBUS/DSM SmartPort SDA SCL G 3V3 CRSF FPORT FPORT...

Table of Contents