R1 WURKS LCG Digital-3 2S/1S Instruction Manual page 5

7. CALIBRATION TO TRANSMITTER
Turn the transmitter on and place the throttle on the neutral.

Connect the ESC to the battery. Turn the ESC power switch ON

Hold the SET button at least for 3
seconds. Release the button when
LED blinks. GREEN
motor sound. "Neutral Position Save"
If the motor moves at Neutral Position, there is an inconsistency in the saved neutral value. Re-calibrate the throttle

range.
The LED will broadcast the status of the ESC settings and throttle movements using the indicators listed below.

Neutral ("BOOST ON MODE")
Neutral ("BOOST OFF MODE")
Max Acceleration
Max Reverse or Brake
GREEN
LED turns on with the
RED LED turns on when throttle is moved
forward to the maximum. "Acceleration Full
Position Save"
Both GREEN
throttle is moved backward to the maximum.
"Brake or Reverse Full Position Save"
Green and
throttle is moved to "Neutral Position" and
motor sound occurs.
GREEN LED
ON
Blinking
OFF
ON
5
and RED LED turn on when
RED LED blink by turns when
RED LED
OFF
OFF
ON
ON