Advertisement
PAX TECHNOLOGY LIMITED
Figure 6: Connecting the IM300 to a contactless card reader
The IM300 can be connected to a magnetic-strip/IC card
reader(IM500 of PAX is recommended) as well as a contactless
card reader (IM700 of PAX is recommended) through the use
of RS232 serial ports using a RJ45 cable as indicated in Figure 5
and Figure 6. The IM300 both controls and powers the
magnetic-strip/IC card and contactless card reader. If the
IM300 is used to link to devices aside from the IM500 and
IM700, the user must first confirm that the software and
hardware for the connection is suitable.
3) This product needs to be installed in a professional way:
a) Antenna installation for WIFI/BT:
NO.8 SMA connector is for the WIFI/BT antenna connection.
The user must follow the antenna parameter if they want
install WIFI/BT antenna to IM300 :
Frequency：2.400 GHz ~ 2.497 GHz
Gain：2.400 GHz ~ 2.497 GHz 0dBi
Antenna radiation efficiency：2.400 GHz ~ 2.497 GHz >50%
Polarity：vertical
VSWR: 2.400 GHz ~ 2.497 GHz <2.0
7
Advertisement
