Table of Contents
Advertisement
Steps for Successful Hot Gel & Hot Lather Shaving
IMPORTANT NOTES
• Oversize lather cans may not fit into the protective base.
• The Control Cap works without the protective base.
• Caution: Do not block the dispenser nozzle with your hand,
as hot steam may be emitted during use or when a can gel or
lather is low. Replace can when it's running low. Hold hand to
the side and under, not in front of the dispenser.
1. Attach the desired gel or lather nozzle (included) and rotate
into place. Caution: Always use the correct nozzle for gel
or lather.
2. Ensure the ADJUSTMENT switch is in the lather position.
(See Figure 1.)
8
Advertisement
Table of Contents
