Table of Contents
Advertisement
Steps for Successful Hot Gel & Hot Lather Shaving
4. Turn the dispenser over and depress the LOCKING TAB.
5. Carefully align the gel or lather valve with the center seal of
the dispenser.
6. Gently insert the can valve into the seal and release the
LOCKING TAB. (See Figure 3.)
Locking Tab
7. Press firmly until the can locks into place.
Note: If the can valve is not properly inserted into the center seal,
gel will leak out of the unit.
Figure 3
10
Center Seal
Advertisement
Table of Contents
Need help?
Do you have a question about the CA900 and is the answer not in the manual?
Questions and answers