Remote Control; Preparations; Prepare The Remote Control; Replace The Remote Control Battery - JVC TH-M337B User Manual

Remote Control

1
2 VOL+/VOL-
3 Function buttons
4 MUTE
5
,
H G
6 PAIR
BF /
7 EQ

Preparations

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.
Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control
•
operation may be impossible if there are any obstacles between the unit and the remote control.
If the Remote Control is operated near other products which generate infrared rays, or if other
•
remote control devices using infra-red rays are used near the unit, it may operate incorrectly.
Conversely, the other products may operate incorrectly.
• First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the
protective tab to activate the remote control battery.

Replace the Remote Control Battery

- The remote control requires a CR2025, 3V
Lithium battery.
1. Push the tab on the side of the battery tray
towards the tray.
2. Now slide the battery tray out of the remote control.
3. Remove the old battery. Place a new CR2025
battery into the battery tray with the correct
polarity (+/-) as indicated.
4. Slide the battery tray back into the slot in the remote control.
• Precautions Concerning Batteries
When the Remote Control is not to be used for a long time (more than a month), remove the
•
battery from the Remote Control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery compartment and replace the
•
batteries with new ones.
Do not use any batteries other than those specified.
•
Do not heat or disassemble batteries.
•
• Never throw them in fire or water.
Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short
•
circuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable type.
•
Switch the unit between ON and
STANDBY mode.
Increase/decrease the volume level.
Select the play function.
Mute or resume the sound.
Skip to previous/next track in
Bluetooth/USB mode.
Play/pause/resume playback in
Bluetooth/USB mode.
Press and hold to activate the
pairing function in Bluetooth mode
or disconnect the existing paired
Bluetooth device.
Select a preset sound effect.
- 6 -