ImageQuest W150 User Manual page 13

2. Click "property" of Adaptor tap.
3. Select one of the following options from the "IP Address" tab
°§ I f the network uses Dynamic Host Configuration Protocol (DHCP), click the
above "Obtain an IP Address via DHCP".
°§ I f you want to use Static IP information allocated to you, click the below
"Specify an IP Address" and then, enter IP Address, Subnet Mask, and
Gateway.
4. If the network requires DNS or WINS setup, you can select "Name Servers"
tab and then, enter DNS or WINS information.
5. You can click "OK" in order to fin i s h .
6. Select "save" from Menu window to save setup.
7. Select "shutdown" from Menu window to apply setup.
8