Sharp CD-MPS900 Operation Manual page 35

! Sleep operation
The radio, CD, MP3 disc and cassette tape can all be turned off
automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or button to select
"SLEEP", and press the MEMO-
RY/SET button.
4
Press the or button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
" 3 hours - 5 minutes
5-minute intervals
" 5 minutes - 1 minute
1-minute intervals
5
Press the MEMORY/SET but-
ton.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP X : XX".
"X : XX" is sleep remaining sleep time.
" The remaining sleep time is displayed for about 10 seconds.
" You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
"SLEEP OFF", and press the MEMORY/SET button.
! To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
1
2
Sleep timer setting
or button to select
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible.
Set the sleep time (see left, steps 1 - 5).
While the sleep timer is set, set the timer playback or recording
(steps 2 - 10, pages 32 - 33).
Timer playback or
recording setting
1 minute - 3 hours
Sleep operation will Timer playback or recording
automatically stop. start time
CD-MPS99
CD-MPS900
or button to select
End time
Desired time
35