Table of Contents
Advertisement
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4
Place the disc on the disc tray 1, label side up.
Be sure to place 8 cm (3") disc in the middle of the disc trays.
5
Press the OPEN/CLOSE button to close the disc tray 1.
[CD]
Total number of tracks
Total playing time
on the disc whose
of the disc whose
numbers is flashing
number is flashing
Due to the structure of its disc information, it takes longer to
read an MP3 disc than a normal CD (approximately 20 to 90
seconds).
6
You can place discs on the trays 2 - 5 by following steps 3 - 5.
7
Press the
/
button to start playback.
" Playback will begin from track 1 on disc 1. After that disc finishes
" After the last track on the fifth disc is played, the unit will stops
" When there is no disc in one of the disc trays (1 - 5), the empty
To exchange other discs while playing a disc:
Press one of the
within 5 seconds, press the OPEN/CLOSE button and exchange
discs.
5" (12 cm)
3" (8 cm)
To remove the discs:
In the stop mode, press the
press the OPEN/CLOSE button.
Caution:
" Do not place two discs in one disc tray.
" Do not play discs with special shapes (heart- or octagon-shaped)
[MP3]
MP3 disc indicator
" Do not push the disc tray while it is moving.
" If the power fails while the tray is open, wait until the power is
Total number
Total number
" If the disc tray is stopped with force, "ER-CD20" will appear on
of folders
of files
" If TV or radio interference occurs during CD operation, move the
" If a disc is damaged, dirty, or loaded upside down, the disc will
Disc play indicator
playing, the next disc will automatically play.
automatically.
tray will be skipped to the next tray with a disc.
1 -
5 buttons for the disc not being played and
1 -
5 button and within 5 seconds,
as it may cause malfunctions.
restored.
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
unit away from the TV or radio.
skip or not play.
CD-MPS99
CD-MPS900
17
Advertisement
Table of Contents
