Advertisement
UTP 1.0
7.
Uninstalling the UTP 1.0
To safely uninstall the UTP 1.0, follow these steps:
1)
Use the built-in tie wrap cutting feature on both side of the UTP 1.0 when
cutting/removing tie wraps, so as not to damage the wire harness or the UTP 1.0
enclosure. See photos below.
I.D. Systems Confidential and Proprietary
Carefully cut tie wrap without damaging harness or the
UTP 1.0 enclosure
Installation & Verification Instructions
13
055-00000889 Rev A
Advertisement
