Check Whether The Device Is Installed - ZLG PCIe-9140I User Manual

Guangzhou ZHIYUAN Electronics Co., Ltd.
Figure 3-2: Search files in the specified location
3. Waits for the installation wizard to install the driver.
Figure 3-3: In the progress of driver installation
4. The "Found new hardware wizard" is prompted that the device driver installation
has completed. Click the "Finish" button to complete the installation.
5. At this point, the system will prompt that the new hardware driver has been
installed and the hardware can be used.
Figure 3-4: Prompt information of "Found a new hardware"

3.2 Check whether the device is installed

Click "Start→Control Panel→System" to check whether the device is installed.
Choose the "Hardware" tab and then click the "Device Manager" button, the interface
User Manual
Date: 2017/10/09
High performance CAN card for PCIe interface
C
©2017 Guangzhou ZHIYUAN Electronics
8
PCIe-9140I User Manual
V1.00