Maintenance; Specifications - Sharp CD-BA150 Operation Manual

MAINTENANCE

TAPE 1
TAPE 2

SPECIFICATIONS

As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
General
Power source:
Power consumption:
Dimensions:
Weight:
Amplifier section
Output power:
Output terminals:
Input terminals:
Compact disc player section
Type:
Signal readout:
D/A converter:
Frequency
response:
Dynamic range:
Tuner section
Frequency range:
AC 120 V, 60 Hz
105 W
Width; 10-5/8" (270 mm)
Height; 13" (330 mm)
Depth; 14-6/8" (375 mm)
13.6 lbs. (6.2 kg)
50 watts minimum RMS per
channel into 6 ohms from 60
Hz to 20 kHz, 10 % total har-
monic distortion
Speakers; 6 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Video/Auxiliary (audio signal);
500 mV/47 kohms
3-disc multi-play compact
disc player
Non-contact, 3-beam semi-
conductor laser pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
FM; 87.5-108 MHz
AM; 530-1,720 kHz
Internal care
Dirty heads, capstans or pinch rollers can cause poor sound
and tape jams. Clean these parts with a cotton swab mois-
tened with commercial head/pinch roller cleaner or isopropyl
alcohol.
After long use, the deck's heads and capstans may become
magnetized, causing poor sound. Demagnetize these parts
once every 30 hours of playing/recording time by using a com-
mercial tape head demagnetizer. Read the demagnetizer's in-
structions carefully before use.
In order to ensure proper operation of the CD player, preven-
tative maintenance (cleaning of the Laser Pick-up lens) should
be performed periodically in order to keep the lens dust-free.
Lens cleaners are commercially available. Contact your local
CD software dealer for options.
External care
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then wipe with a dry cloth.
Do not use chemically treated cleaning cloths or other chemi-
cals.
Cassette deck section
Frequency response:
Signal/noise ratio:
Wow and flutter:
Speaker section
Type:
Maximum input power: 100 W
Rated input power:
Impedance:
Dimensions:
Weight:
16
50-14,000 Hz (Normal tape)
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
0.3 % (WRMS)
3-way type [3-15/16" (10 cm) woofer,
3-15/16" (10 cm) woofer and 2"
(5 cm) tweeter]
50 W
6 ohms
Width; 9-1/8" (231.5 mm)
Height; 13" (330 mm)
Depth; 8-1/4" (210 mm)
6.8 lbs. (3.1 kg)/each