Page 1
Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: T E FLO N For easy installation of your Brizo faucet you will need: ® • To READ ALL the instructions completely before beginning.
This warranty excludes all industrial, commercial & business usage, whose purchasers are parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty.
RP50267▲ RP50271▲ RP60132 RP50274▲ RP50277▲ Handle Cap Escutcheon, Baseplate & Locknuts Handle Screw Dispenser Assembly Vase Assembly Tapa de la Manija Chapetón, Placa de Base y Contratuercas Tornillos Ensamble del Dispensador Ensamble Recipiente Capuchon de la manette Boîtier, plaque de finition et écrous de blocage Distributeur Vase RP50273...
Page 4
Call mounting hole in sink. For decks thicker than 2 1/2" Place escutcheon (1) over 1-877-345-BRIZO (2749) to request for free. use extension nut (4) included. baseplate. Insert faucet (2) down For decks thicker than 2 1/2" use into escutcheon assembly.
Hose Installation Insert hose guide (1) into hose end (2). Pass hose (2) through Push hose end (1) onto faucet outlet (2). Attach clip (3) over hoses as shown. Pull down faucet (3). Thread wand assembly (4) onto hose to prevent moderately to ensure connection has been made.
Page 6
Water Line Connections Potential Problems and Remedies acceptable installation, be sure to read the instructions and plan ahead. When cutting the l Tubing is not cut perpendicular to the axis of the Ensure all fittings and end connections are free of supply tubing the installer accepts the responsibility tube: carefully make an additional cut, being careful debris.
Page 7
Correct method Incorrect Installation Método Correcto Instalación Incorrecta Bonne méthode Installation Incorrecte Do not install sleeve Ensure cut is straight. upside down. No instale la manga Asegúrese que el corte Custom Fit Connections - Plastic Sleeve Installation Instructions boca abajo. esté...
Page 8
Soap Dispenser Installation - Accessory Order Only Turn on hot and cold water supplies Reinstall the spray wand. Check all Separate head (1) from body assembly (2). Make sure gasket (1). Pull the hose assembly (2) out connections at arrows for leaks. (3) is properly seated in the base of the body assembly.
Need help?
Do you have a question about the 63005LF Series and is the answer not in the manual?
Questions and answers