Technics ottava S SC-C50 Operating Instructions Manual page 57

Playback does not start.
The sound is interrupted.
• If using the 2.4 GHz band on the wireless router,
simultaneous use with other 2.4 GHz devices, such
as microwaves, cordless telephones, etc., may
result in connection interruptions. Increase the
distance between this unit and these devices.
 If your wireless router supports 5 GHz band, try
using the 5 GHz band.
• Do not place this system inside a metal cabinet, for
it might block the Wi-Fi signal.
• If the playback stops, check the playback status on
the device.
• Place this system closer to the wireless router.
• Press and hold [•DIMMER / -INFO] to display the
network status, and press again to display the
Wi-Fi signal strength level. The signal strength is
shown as 3 (max) - 0 (not connected). Change the
position or angle of your wireless router or this
system, and see if the connection improves.
• If several wireless devices are simultaneously using
the same wireless network as this unit, try turning
off the other devices or reducing their wireless
network usage.
• Reconnect the devices to the network.
• Turn the wireless router off and then on.
• Setting QoS function of your router to "disable"
may resolve the sound interruptions.
• With some iOS and iTunes versions, it may not
be possible to restart the AirPlay playback if the
selector is changed (e.g. "AUX") or this unit is in
standby mode, during the AirPlay playback. In this
case, select a different device from the AirPlay icon
of the Music App or iTunes and then re-select this
system as the output speakers. (⇒ 40)
• If the above solutions do not solve the problem,
make a wired LAN connection for all connected
devices which have LAN terminal (this unit,
Network Attached Storage, media server, etc.).
(⇒ 22)
57
(Continued)