Using The Motorized Floor Nozzle; Choosing The Appropriate Setting - Shark Rocket HV384Q Series Instructions Manual

USING THE MOTORIZED
FLOOR NOZZLE
WARNING: This
vacuum does not
stand up on its own,
so when taking a
break from cleaning,
rest it against a
piece of stable
furniture or lay it flat
on the floor� Using
for an application
where the unit lacks
stability may result
in personal injury�
NOTE: Before
vacuuming your delicate
area rugs or carpet, refer
to the manufacturer's
recommended cleaning
instructions.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are on and
working as they should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
No Light
1 Plug the unit in and recline the wand.
The brushrolls are off because
the vacuum is off.
9
1-800-798-7398
CHOOSING THE
APPROPRIATE SETTING
Bare Floor, Area Rugs (I)
The Shark ® Rocket ® Complete with DuoClean
handle. Slide the power switch to appropriate speed setting (I or II) and start cleaning.
Bare Floor, Area Rugs (I) – The brushroll and the Soft Roller both spin together slowly to
clean bare floors and delicate area rugs. The Soft Roller traps fine dust and large particles,
while the brushroll directs that debris to the suction channel.
High Pile Carpets (II) – Both brushrolls spin faster, working together to pick up debris below
the surface of your carpets.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please set to High Pile Carpets (II).
High Pile Carpets (II)
™ has a 2-speed power slider switch on the
s h a r kc l e a n . c o m
10