CD. Click the 'Accept' button in the 'Microsoft License' window. (This may take a few minutes to install). When installed, the ThermaData Studio software installation will resume. • The program files will be installed by default to "C:\Program Files\Thermoworks Inc.\...
• Click the 'Close' button to exit the installation procedure. • An icon for the ThermaData Studio software will be placed on the desktop. ThermaData Studio and Help shortcuts will be placed in 'Start ' - 'Programs' - 'Thermoworks Inc.' - 'ThermaData Studio'.
SETTING UP THE LOGGER TO LOG TEMPERATURES • Click the RF ThermaData Logger tab on the software and click the 'Logger Settings' icon in the 'Control' icon group. Enter a name for the logger in the Title (User ID) box.
Page 5
• Loosen the antenna plug and rotate the antenna to a different orientation. Retighten the plug after. • Move the position of the RF ThermaData Logger a little at a time until the signal improves. PLEASE NOTE: Radio frequency waves travel in straight lines so ideally the base-station and the ThermaData Logger should not have any large metal object in a direct line between them.
Page 6
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. •...
Page 7
™ GUIDE DE DÉMARRAGE RAPIDE - THERMADATA RF LOGGERS Modèles: WTB, WTB1F, WTB1F/3, WTB1C, WTBF, WTBF/3, WTB2F, WTB2F/3, WTBC, WTB2C • Supprimez les anciennes versions du logiciel ThermaData Studio avant d’installer la nouvelle version (cela n’entraînera pas la perte ni la suppression de vos fichiers de données). •...
ThermaData Studio. • Si d’autres RF ThermaData Loggers sont à la portée de la station de base, ils sont automatiquement reconnus et apparaissent sur le document de synthèse. Il s’agit de données en...
Page 9
PARAMÈTRAGE DE L’ENRIGISTREMENT POUR L’ENREGISTREMENT DES TEMPÉRATURES • Cliquez sur l’onglet « RF ThermaData Logger » dans le logiciel puis sur l’icône « Logger Settings» au sein du groupe d’icônes « Control ». Saisissez un nom pour l’enregistrement dans la boîte Titre (ID de l’utilisateur).
LECTURE DES TEMPÉRATURES STOCKÉES AU SEIN DE L’ENREGISTREMENT • Cliquez sur l’onglet « RF ThermaData Logger » dans le logiciel, et cliquez sur l’icône « New Document » au sein du groupe d’icônes « Download ». TEST DE LA PUISSANCE DU SIGNAL •...
Page 11
Afin de contrôler la température dans les chambres, réfrigérateurs et congélateurs, un RF ThermaData Logger avec sonde à distance doit être utilisé. Placez l’enregistrement sur l’extérieur du dispositif, sur le côté le plus proche de la station de base ou sur le dessus. Placez la sonde à l’intérieur de la chambre, du réfrigérateur ou du congélateur.
Page 12
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement". 1762 W. 20 S. #100, Lindon, UT 84042 Ph: 801-756-7705 Fax: 801-756-8948 www.thermoworks.com P-12-011-02-b 547-305 / 26.09.13...