Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ElectrIQ IQ-WIFIRGBWLEDSTR
- Page 1 3 Metre WiFi Smart LED Strip SETUP AND USER MANUAL IQ-WIFIRGBWLEDSTR Thank you for choosing electriQ. Please read this user manual before using this item and keep it safe for future reference. Visit our page www.electriQ.co.uk for our entire range of...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read all instructions. All user guidelines must be read before the device is used. Retain the instructions for further use. For indoor use only. Do not position the unit where it would be subjected to extreme moisture, temperature, or dust. -
Page 3: Before You Start
INTRODUCTION Thank you for purchasing an electriQ Wifi controlled LED light strip. BEFORE YOU START Ensure your router provides a standard 2.4ghz connection. If your router is dual band ensure that both networks have different network names (SSID). The provider of your router / Internet service provider will be able to provide advice specific to your router. -
Page 4: Installing The App
INSTALLING THE APP The app can be downloaded to your phone either by using the QR codes below, or by searching for “Tuya Smart App” in your chosen app store Android POWERING THE LED STRIP LED Strip Connector Power Adaptor Connector Box Connect the connector box to the LED strip, ensuring the... - Page 5 Once installed the app needs to be registered, following the next steps: 1. Press on the register 2. Read the Privacy button at the bottom of policy and press the the screen. Agree button. 3. Enter your email address or phone number and press continue to register.
- Page 6 4. A verification code will 5. Type in the password be sent by the method you would like to selected in step 3. create. This needs to Enter the code into be 6-20 characters, the app. containing letters and numbers. 6.
- Page 7 SETTING UP YOUR HOME WITHIN THE APP TUYA is designed so it can work with a large number of compatible smart devices within your home. It can also be set up to work with multiple devices within different houses As such during the setup process, the app requires that different areas are created and named to allow easy management of all your devices.
-
Page 8: Setting Your Location
SETTING YOUR LOCATION Use your finger to move the orange HOME symbol. When the symbol is in the approximate location of your home, press the CONFIRM button in the top right corner. ADD ANOTHER ROOM Type the name of the room to add, and press Done in the top right corner. - Page 9 ADDING A DEVICE TO THE APP The LED wifi strip has two different setup modes, Quick Connection and AP (Access Point). The quick connection is a quick and simple way to set the unit up. The AP connection uses a direct local wifi connection between your phone and the device to upload the network details.
- Page 10 CONNECTING USING QUICK CONNECTION Before initiating the connection, make sure that your phone is connected to the wifi network and that the LED strip is flashing once per second. If not follow the instructions in the factory reset section. 1. Open app and press 4.
- Page 11 2. Ensure the LED strip 3. Enter your wifi is flashing once per password and press second，then press confirm. Please note the orange button at this is case sensitive. the bottom of the screen to confirm. 5. This will then transfer the settings to the bulb.
- Page 12 CONNECTING USING AP MODE (ALTERNATIVE METHOD) Before initiating the connection, make sure your phone is connected to the wifi network and that the bulb is flashing once every 2 seconds. If not follow the guide in the factory reset section to change the connection mode.
- Page 13 3. Press on the AP mode 4. Ensure the bulb is slowly flashing (once button in the top right per second), then of the screen. press the orange button at the bottom of the screen to confirm. 5. Go to network settings in your phone and connect to the “SmartLife-xxxx”...
- Page 14 6. Within the app, enter 7. This will then transfer your wifi password the settings to the and press Confirm. bulb. 8. Once the connection process has completed, go back to the network settings on your phone to ensure your phone has reconnected to your wifi router.
- Page 15 CONTROLLING YOUR DEVICE THROUGH THE Now that your bulb is linked up to your network, you can now control it from your phone. From the main control screen you can turn the bulb on and off by pressing on the power icon to the right hand side of the device.
- Page 16 CHANGE HOME: Can change between homes, if you have devices set up at different locations. ENVIRONMENTAL INFORMATION: Provides outdoor temperature and humidity based on the location details entered. ROOMS: Use to view the units set up within each room. SMART SCENE: Allows you to program intelligent behaviour based on the internal and external environment.
-
Page 17: Device Screen
DEVICE SCREEN The buttons at the bottom allow access to further settings including turning the unit on and off, changing the colour, setting a scene or setting a power on or off time. Return to Change the Home device Screen settings Turn the light... - Page 18 CHANGE COLOUR The colour change screen allows you to slide the selector around the bulb icon to change the colour of the bulb. It also allows you to select both the brightness of the bulb, and the intensity of the colour. SCENE Allows the bulb to automatically colour change, or flash.
- Page 19 CHANGING THE NAME OF YOUR DEVICE When in any of the device screens further settings for the device can be accessed, by pressing on the three dots in the top right hand corner. option within this allows you to change the name of the device to something relevent to the use of the product, such...
-
Page 20: Smart Scene
SMART SCENE Smart Scenes is a powerful tool providing the option to switch the light on or off based both on conditions within the room (dependant on other devices features) and outside influences. This gives the user the option of specifying intelligent actions. These are split into two categories Scene and Automation. -
Page 21: Troubleshooting
TROUBLESHOOTING Check whether the device is powered on and is in the correct standby mode, if not please refer to the factory reset section Ensure the wifi password has been entered into the app correctly ( Case sensitive) Check that the phone is connected to the wifi you are connecting the device to. -
Page 22: Electriq Uk Support
UK SUPPORT www.electriQ.co.uk/support Service Line: 0871 620 1057 Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk Unit J6, Lowfields Business Park Lowfields Way, Elland West Yorkshire, HX5 9DA Disposal: Do not dispose this product as unsorted municipal waste. Collection of such waste must be handled separately as special treatment is necessary.