Advertisement

Steam Cleaner
Wasi-Steam 2
Wasi-Steam 2 with accessory splash protection
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wasi-Steam 2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wassermann Wasi-Steam 2

  • Page 1 Steam Cleaner Wasi-Steam 2 Wasi-Steam 2 with accessory splash protection USER MANUAL...
  • Page 2 Dear customer, Thank you for choosing a product from the Wassermann range. Wassermann Dental- Maschinen incorporates the highest standards of quality and the latest technology. In order to enjoy maximum performance and years of trouble-free operation, please read this user manual carefully before you connect this device and start work, and operate the device according to the recommended guidelines.
  • Page 3: Table Of Contents

    Contents 1 Features..........................4 2 Safety Symbols used in this Manual..................4 3 Safety Guidelines.......................5 4 Responsibility for Operation or Damage................7 4.1 Warranty........................7 5 Application..........................7 6 Before Starting........................8 6.1 Transport........................8 6.2 Installation........................8 6.2.1 Wall Mounting.......................9 6.3 Storage........................9 7 Start-up/ Installation......................10 7.1 Filling.........................10 8 Operation.........................11 8.1 General Operating Instructions.................11 9 Troubleshooting.......................13...
  • Page 4: Features

    Features Powerful steam-cleaner for all cleaning applications  Water connection, electronic delimer, service interval display and huge stainless  steel boiler User-friendly operation using swivel head to regulate wet steam saturation and  steam quantity Selector for wet or dry steam ...
  • Page 5: Safety Guidelines

    Safety Guidelines Configuring and operating this equipment requires precise knowledge and observance of the instructions in this user manual. The equipment is designed only for its intended application. WARNING: Servicing and repairs should be carried out only by authorised specialists. Disconnect the power plug before starting any maintenance work.
  • Page 6 If there is a water leak, the moisture detector will switch the unit off automatically. When it is not in use, the unit switches to a temperature of 158°C and a pressure of 5 bar. The temperature increases automatically to 164°C and the pressure to 6 bar as soon as the steam gun is pressed.
  • Page 7: Responsibility For Operation Or Damage

    The unit has to be maintained and operated in accordance with this user manual. Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the nonobservance of these instructions.
  • Page 8: Before Starting

    Before Starting Transport Before transporting the unit, ensure that it has been unplugged from the power socket. Make sure that it is packed correctly in order to avoid accidental damage. Be sure to check for any transport damage when unpacking the goods. Note down any damage if found.
  • Page 9: Wall Mounting

    6.2.1 Wall Mounting Use the following hole template if mounting the unit on a wall: Wall bracket (WASI-STEAM 2)  8 mm for dowel 323 mm min. 455 mm 410 mm Work surface Storage The unit location is very important when it comes to workplace safety, even if it is only to be set up there for a short period.
  • Page 10: Start-Up/ Installation

    Start-up/ Installation Before starting the unit, connect up the following: Use the water supply hose supplied to connect the steam cleaner (left side) to a tap (the tap must have a non-return valve and a breather – washing-machine tap). Connect the drain hose supplied to the left side of the unit (if possible, run the hose into a heat-resistant container or washbasin as the draining water can be very hot).
  • Page 11: Operation

    Operation General Operating Instructions All instructions for using the unit, whether in verbal or written form, are based on our own experience and experimentation and can only be regarded as guidelines. Use the appropriate switch to select dry steam (4) or wet steam (3). If you are using wet steam, set the amount of hot water using controller wet steam (2) on the front of the unit (0 = no water, 5 = max.
  • Page 12 Controller steam quantity Controller wet steam WASI - STEAM 2 10 9 8 10 9 Button wet steam Button dry steam Lamp (LED) dry steam Lamp (LED) wet steam Lamp (LED) low water Lamp (LED) water intake Lamp (LED) heating Lamp (LED) water leak...
  • Page 13: Troubleshooting

    Troubleshooting Fault Cause Solution No display reading Blown fuse Replace fuse and trace cause or contact and/or only ON/OFF Service Department switch illuminated Temperature/pres Check pressure gauge – if pressure in red sure too high range (above 6.3 bar), check for fault and repair if necessary (Service Workshop) Hot water rather than Water container...
  • Page 14: Care And Maintenance

    10.2 Maintenance The Wasi-Steam 2 should be descaled depending on use, but at least once per week, according to the following instructions. Basically, it should be ensured that the unit is kept clean. Your Wassermann staem cleaner incorporates a special technique for avoiding lime build-...
  • Page 15: Rinsing/ Decalcification

    10.2.1 Rinsing/ Decalcification Flush the steam vessel only after the pressure has dropped to zero. Otherwise, there is a very high risk of scalding. When draining the water, observe the following points: Before draining the water, ensure that the unit has cooled down (pressure •...
  • Page 16: Repairs

    10.3 Repairs Servicing or repairs to the unit has only to be carried out by qualified technicians. Only original spare parts are to be used. Responsibility for the product is voided if unauthorised persons alter it or if inappropriate components are installed. 10.4 Spare Parts If necessary please contact our service hotline phone.
  • Page 17: Technical Data

    Technical Data Wasi-Steam 2 Item no.: 174992 Voltage 220–240 V / 50/60 Hz Power consumption 8.3 A (Si 10 A) Output 1880 W W x H x D 450 x 490 x 265 mm Weight 30 kg Working pressure max. 6 bar (stand by 5 bar) Steam temperature max.
  • Page 18: Eu Declaration Of Conformity

    Product description: Steam Cleaner for Dental-Maschinen GmbH dental Rudorffweg 15-17 applications 21031 Hamburg Germany Model: Wasi-Steam 2 Item no. 174992 Aapplicable DIN EN 61010-1 standards: DIN EN 61000-6-3 DIN EN 61000-6-1 DIN 45635-1 DIN EN 60335-1 Hiermit wird bestätigt, dass die oben bezeichnete Maschine den genannten EU-Richtlinien entspricht.
  • Page 19 Notes:...

Table of Contents