Schematic Diagram - Main Section (3/4) - Sony XDP-4000X Service Manual

4-9. SCHEMATIC DIAGRAM — MAIN SECTION (4/4) — • Refer to page 39 for IC Block Diagrams.
(Page 34)
(Page 34)
– 31 –
XDP-400
Note:
• All capacitors are in µF unless otherwise noted. pF: µµF
50 WV or less are not indicated except for electrolytics
and tantalums.
• All resistors are in Ω and
1
/ W or less unless otherwise
4
specified.
• % : indicates tolerance.
• : internal component.
¢
• C : panel designation.
• U : B+ Line.
• Power voltage is dc 14.4V and fed with regulated dc power
supply from B+ cord and Master unit. (See page 2.)
• Voltage is dc with respect to ground under no-signal
condition.
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal produc-
tion tolerances.
• Signal path.
F
: ANALOG
J
: DIGITAL
– 32 –