Part Names; Projector (Front And Top View) - Sharp Notevision PG-A10S Operation Manual

Part Names

Numbers in refer to the main pages in this operation manual where the topic is explained.

Projector (Front and Top View)

Power indicator
Illuminates red when the
projector is in standby.
When the power is turned
on, this indicator will
illuminate green.
Power ON/OFF
buttons
For turning the power on or off.
KEYSTONE button
For entering the Keystone
Correction mode.
AUTO SYNC button
For automatically
adjusting images when
connected to a computer.
Remote control
sensor
Exhaust vent
Foot release
(on the side of
the projector)
Front adjustment foot
Attaching and removing the lens cap
• Press on the two buttons of the lens cap
and attach it to the lens, then release the
buttons to lock it in place.
• Press on the two buttons of the lens cap
and remove it from the lens.
10
A10X_A10S#E_Print#p06_14.p65
26
26
29
38
13
52
21
21
10
55
Lamp replacement
indicator
Illuminates green indicating
normal function. Replace
the lamp when the indicator
illuminates red.
55
Temperature warning
indicator
When the internal
temperature rises, this
indicator will illuminate red.
27
INPUT button
For switching input mode
1, 2 or 3.
27
Volume buttons
For adjusting the speaker
sound level or the
Keystone Correction.
22
Zoom knob
22
Focus ring
Speaker
21
Foot release
21
Front adjustment
foot
53 Air filter/cooling
fan (Intake vent)
(on the bottom of
the projector)
03.2.4, 2:01 PM