Set-Up And Safety - Beko E5 Operating Instructions Manual

Beko tv dvd combo operating instructions
Table of Contents

Advertisement

Set-Up and Safety

Please note the following information when setting up your television set.
This television set is designed to receive and display video and audio
signals.
Any other use is expressly prohibited.
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
Ensure sufficient clearance between the TV and the wall cabinet.
The television set is designed for use in dry rooms. If you do use it in the
open, please ensure that it is protected from moisture, such as rain or
splashing water. Do not expose the television set to any moisture.
If the television is subject to sudden changes in temperature, for example
if it is brought in from the cold to a warm room, connect it to the mains
supply and let it stand for at least two hours before you insert a disc.
Do not place any vessels such as vases on the television, as they may spill
liquid, thus presenting a safety risk.
Place the television set on a solid, level surface. Do not place any objects
such as newspapers on the television set or cloth or similar items beneath
it.
Do not place the television set close to heating units or in direct sunlight,
as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the
television set. For reasons of safety, have a specialist remove any dirt
deposits in the set from time to time.
Keep the television set away from magnetic fields (loudspeaker boxes, for
example).
Do not open the television set under any circumstances. No warranty claims
are accepted for damage resulting from improper handling.
Ensure that the mains cable is not damaged.
Thunderstorms are a danger to all electrical devices. Even if the television
set is switched off, it can be damaged by a lightning strike to the mains or
the antenna cable. Always disconnect the mains and antenna plugs during
a
storm.
Do not insert foreign objects in the disc compartment.
If the device is unable to scan discs perfectly, use a standard, commercially
available cleaning CD to clean the laser optics. Other cleaning methods
may damage the laser optics.
Always keep the disc compartment closed to prevent dust from collecting
on the laser optics.
Clean the screen with a soft, damp cloth. Only use plain water.
3

Advertisement

Table of Contents
loading

Table of Contents