Location Of Controls; Charging The Internal Battery; Power On And Off; Bluetooth Pairing - Roadstar SPK-300BT Instruction Manual

WARNINGS
This unit must not be exposed to moisture or rain.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet or in
a built-in installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
1 2 3
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
English 1
4 5 6
2 English
SPK-300BT
HANDS FREE BLUETOOTH SPEAKER.
INSTRUCTION MANUAL
Please read this instruction manual carefully and familiarize yourself with your new
Bluetooth Speaker before using it for the first time. Please retain this manual for future
reference.

LOCATION OF CONTROLS

1. VOLUME
2. LIGHT INDICATOR
3. FUNCTION BUTTON
4. MICROPHONE FOR HANDS FREE
5. AUX-IN INPUT
6. MINI-USB CHARGING SOCKET

CHARGING THE INTERNAL BATTERY

Remove carefully from the box the SPK-300BT and before starting using it, must be
recharged the internal Li-Po battery.
1) Connect the mini-USB cable (supplied) to any +5V USB 500 mA Power source (PC
or external AC Adapter).
2) When powered, the Light Indicatror (2) become RED.

POWER ON AND OFF

1) Press the Function button (3) 5 seconds to switch ON the unit. A voice says "POWER ON
can be heard from the speaker. The Light indicator (2) become BLUE.
2) to power OFF the unit, keep pressed the Function button (5) 5 seconds. A voice "POWER
OFF" can be heard from the speaker.
3) If the SPK-300BT is not connected to any Bluetooth or external source, it switch OFF itself
after 10 minutes.

BLUETOOTH PAIRING

After power the Speaker ON, the blue Light indicator (2) start blinking to indicate that
the Speaker is waiting for pairing to Bluetooth transmitter devices.
During this condition, enable the Bluetooth function on your mobile phone or tablet until the
identification name SPK-300BT compare in the display.