Table of Contents
Advertisement
Advanced Operations
Listening to music from your
external device
The unit can be used to play the music from many
types of external device. (Refer to the page 11)
1. Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1/! (Power).
3. Select the AUX function by pressing AUX on the
unit or FUNCTION on the remote control.
4. Turn the external device and start it playing.
Recording to USB
1. Connect the USB device to the unit.
2. Select a function by pressing USB, TUNER, CD,
AUX on the unit or FUNCTION on the remote
control.
One track recording - You can record to USB
after playing a fi le you want.
All tracks recording - You can record to USB after
stop.
Program list recording - After showing the
programmed list, you can record it to USB.
3. Start the recording by pressing R on the unit or
X REC on the remote control.
4. To stop recording, press Z.
Pausing recording
During recording, press R on the unit or X REC
on the remote control to pause recording. Press it
again to restart recording. (Only Radio, AUX)
MCD206-A0U-APANLLK-ENG.indd 17
MCD206-A0U-APANLLK-ENG.indd 17
To select recording bit rate
and speed
1. Press R on the unit or X REC on the remote
control for longer than 3 seconds.
2. Use Cc/vV on the unit or remote
control to select the bit rate.
3. Press R on the unit or X REC on the remote
control again to select the recording speed.
4. Press Cc/vV on the unit or on the
remote control to select a desired recording
speed. (Only AUDIO CD)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music fi le.
5. Press R on the unit or X REC on the remote
control to fi nish the setting.
Operating
17
3
11. 10. 11
11. 10. 11
2:20
2:20
Advertisement
Table of Contents
