Table of Contents
Advertisement
8
SAFETY INSTRUCTIONS
The series VH flowmeters are in conformity with all essential
requirements of all EC directives applicable to them:
2014/68/EU
2014/30/EU
2012/19/EU
2011/65/EU
The declarations UE of conformity can be downloaded from the section "Download" of the
Tecfluid S.A. website www.tecfluid.com
8.1
Pressure equipment directive
Devices of series VH, due to their size, are rated as Category I are not within the scope of
the directive and therefore they have not the CE mark according to pressure directive. These
devices are subject to applicable sound engineering practice (SEP).
This equipment is considered as being a pressure accessory and NOT a safety accessory as
defined in the 2014/68/EU directive, Article 2, paragraph 4.
8.2
Certificate of conformity TR CU (EAC marking)
Tecfluid S.A. have subjected the series VH of flowmeters to a
certification procedure according to the technical regulations of the
Customs Union of the Eurasian Economic Union (EEU).
This Certificate is an official document confirming the quality of production
with the standards on the territory of the Customs Union, particularly
regarding safety requirements and electromagnetic compatibility.
9
ADDITIONAL INSTRUCTIONS FOR THE ATEX VERSION
Flow switches series VH can be considered simple apparatus according to IEC 60079-11
standard, and therefore they are not marked as ATEX.
9.1
Non-metallic parts
WARNING: POTENTIAL RISK OF ELECTROSTATIC CHARGE
Since the danger of ignition by electrostatic discharge when rubbing this protection can not
be avoided, the instrument must always be cleaned with a damp cloth.
Pressure equipment directive (PED)
Electromagnetic compatibility directive (EMC)
Waste electric and electronic equipment (WEEE).
Restriction
of
the
substances in electrical and electronic equipment
(ROHS).
use
of
certain
hazardous
8
Hide quick links:
Advertisement
Table of Contents
