Medicine cabinet with gfci electrical outlet (19 pages)
Summary of Contents for Allen + Roth SUCO
Page 1
THESE INSTRUCTIONS SHOULD ONLY BE PRINTED USING ADOBE ACROBAT AND SHOULD NOT BE FAXED OR REPRODUCED ON A DIGITAL COPIER. AMERICAN WOODMARK CORPORATION PROVIDES THESE INSTRUCTIONS ON AN “AS IS” BASIS AND DISCLAIMS ANY AND ALL LIABILITY FOR ANY INACCURACIES, OMISSIONS OR TYPOGRAPHICAL ERRORS CAUSED BY THE USER’S EQUIPMENT OR BY ANY THIRD PARTY’S EQUIPMENT.
Page 2
Using a 5/32” drill bit, drill a pilot hole approximately 1-1/2” deep through the back of the SUCO and into each stud that was located in Step 1. You may need to remove SUCO unit and drill the pilot hole from the back of the unit if you cannot reach the holes while the unit is in place.
Page 3
Utilice una broca de 5/32” para realizar agujeros guía de aproximadamente 1-1/2” de profundidad a plana de 1-1/2” través de la parte posterior de la unidad SUCO y dentro de cada uno de los montantes colocados en • (2) Tornillos N.º 10 para madera, de cabeza el paso 1.
Need help?
Do you have a question about the SUCO and is the answer not in the manual?
Questions and answers