Knox Video RS16x16HB Operation And Technical Manual

Hide thumbs Also See for RS16x16HB:

Advertisement

RS16x16HB
Operation and Technical Manual
with this product, Knox Video Technologies provides a five-year limited
warranty for this product. The above warranty period shall begin on the
date of shipment by Knox to purchaser or, if purchaser is an authorized
reseller of such Knox products, from the date of shipment by the reseller to
the reseller's original customer.
which has been caused by misuse, abnormal or unusually heavy use, neglect,
alteration, improper installation, unauthorized repair or modification, improper
testing, accidental or causes external to the product such as but not limited
to excessive heat or humidity, power failure, or improper installation.
IF SERVICE IS REQUIRED:
If the product does not perform as warranted, call Knox Video Technologies
at 301-840-5805 for available service options.
If it is necessary to return an item to Knox, the defective product should be
securely packaged in original boxes and insured for shipment. Owner agrees
to insure and accept all liability for loss of or damage to this product.
YOU MUST CALL TECHNICAL SUPPORT AT 301-840-5805 FOR
A RETURN AUTHORIZATION NUMBER (RA) AND "SHIP-TO"
ADDRESS BEFORE SHIPPING ANY PRODUCT TO KNOX.
This warranty gives you specific legal rights, and you may also have other
rights, which vary from state to state.
KNOX VIDEO
TECHNOLOGIES
8547 Grovemont Circle
Gaithersburg, MD 20877
TEL 301•840•5805
FAX 301•840•2946
www.knoxvideo.com
Limited Warranty
Unless otherwise stated in the product specific documentation received
The warranty set forth above shall not apply to failure or deficiency
Knox Video Technologies
8547 Grovemont Circle
Gaithersburg, MD 20877
301-840-5805 / 301-840-2946 Fax
www.knoxvideo.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RS16x16HB and is the answer not in the manual?

Questions and answers

Summary of Contents for Knox Video RS16x16HB

  • Page 1 IF SERVICE IS REQUIRED: If the product does not perform as warranted, call Knox Video Technologies at 301-840-5805 for available service options. If it is necessary to return an item to Knox, the defective product should be securely packaged in original boxes and insured for shipment.
  • Page 2: Warnings, Cautions And Others

    Warnings, Cautions and Others For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital Mises en garde, precautions et indications diverses device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 3: Section 1. General Information

    Typ <-70dB @ 5MHz Typ <-55dB @ 20MHz The RS16x16HB routing switcher is a device which accepts up to sixteen video Typ<-25dB @ 100MHz inputs and up to sixteen stereo audio inputs (that is, sixteen channels of left and right...
  • Page 4: Section 2. Installation

    There is no power switch on the Static Sensitive Connectors! During the installation process and whenever RS16x16HB; it is designed to be ON at all times. (If it is desirable to have the changing cables to the Knox RS16x16HB inputs and outputs, use extreme caution...
  • Page 5: Setting The Baud Rate

    2.6 SETTING THE BAUD RATE The user may choose between two modes of answerback: verbose and If the RS16x16HB is to be controlled through its RS232 port, it is important to nonverbose. Select the mode using position 3 of the programming switch located set the correct baud rate.
  • Page 6: Section 3. Operation

    To prevent the crosspoints from being changed by the front panel keypad, put switch position 4 in the ON (up) position. Switches 6-8 should always be off. This section explains in detail the operation of the RS16x16HB using either the front panel keypad or the RS232 port.
  • Page 7 On the front panel keypad, push the A (Audio) key, then a two-digit number for control device. No handshaking is required. The RS16x16HB RS232 Port is configured the destination (output) you wish to route from, then a two-digit number for the as a DCE.
  • Page 8 KNOX VIDEO KNOX VIDEO RS16x16HB ROUTING SWITCHER RS16x16HB ROUTING SWITCHER 3.4.3 SENDING A STRING OF COMMANDS TO BE To route both video and audio from different inputs, send an eight-byte EXECUTED AT THE SAME TIME command in the form: Bxxyyzz(ENTER)
  • Page 9 3.4.7 TIMED SEQUENCER The status report does not disturb the existing crosspoint pattern. The RS16x16HB can be set to cycle continuously through its sixteen stored patterns on a timed basis. To set the time interval and start the cycling send the...
  • Page 10: Section 4. Maintenance

    Select the mode using position 3 of the programming switch located on the rear panel of the RS16x16HB. Position 3 ON is verbose, while position 3 OFF is nonverbose. The RS16x16HB is shipped with a memory backup battery which retains the routing crosspoint information when power is off.
  • Page 11 Switches 6 through 8 should always be OFF. Switches are ON when pushed up. Figure 4.1 Baud Rate Setting The switches are read by the microprocessor only at power-up; for switch configuration changes to take effect, cycle the power input to the RS16x16HB. Page 17...

Table of Contents