Do you have a question about the Rotary Clothesline 37 and is the answer not in the manual?
Questions and answers
Judy
January 19, 2025
Need instructions on how to put the winding section together
1 comments:
Mr. Anderson
May 14, 2025
To assemble the winding section of the Hills Rotary Clothesline 37:
1. Wind the handle to adjust the height of the hoist. 2. Fit one or more plastic spacers into the ground socket as needed. 3. The winding mechanism includes an automatic device that disengages the handle at the maximum and minimum heights. 4. A slight clicking noise indicates the system is operating correctly.
Make sure the head assembly is properly engaged into the main standard and does not move.
Need help?
Do you have a question about the Rotary Clothesline 37 and is the answer not in the manual?
Questions and answers
Need instructions on how to put the winding section together
To assemble the winding section of the Hills Rotary Clothesline 37:
1. Wind the handle to adjust the height of the hoist.
2. Fit one or more plastic spacers into the ground socket as needed.
3. The winding mechanism includes an automatic device that disengages the handle at the maximum and minimum heights.
4. A slight clicking noise indicates the system is operating correctly.
Make sure the head assembly is properly engaged into the main standard and does not move.
This answer is automatically generated