Advertisement
Installation
Mount on Wood Stud Wall
2A
WARNING
• Make sure that mounting screws are anchored into the center of the studs. Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
Screw the
assembled wall
plate onto the
wall
Find and mark the exact
location of mounting holes
4
55 mm
(2.2 in.)
O4.5 mm
O(3/16 in.)
Drill pilot holes
20 mm
Washer
Anchor
Bolt
Advertisement
