Troubleshooting; Cleaning Instructions - ADURO Single Red Manual

Eye safety
Eye holes allow the user to see through the Aduro facial mask, though during a treatment
closing of the eyes is recommended. Some people may find the light uncomfortable as it can
be considered bright. Do not directly look into the light source.

Cleaning instructions

The Aduro facial mask should be cleaned after each use. Though Aduro facial mask is splash
water resistant, it should not be submerged in liquid.
How to clean
Make sure the Aduro facial mask is unplugged and turned off. Then use a damp, soft cloth with
a mild alcohol-free cleaning detergent to clean the facial area. Repeat until the Aduro facial
mask is clean and then dry with a clean dry cloth.
Do not use alcohol or harsh chemicals or any acidic cleaning materials to clean the Aduro facial
mask. This can damage the Aduro facial mask and effect efficiency.
Traveling with Aduro
The Aduro facial mask is designed to be a perfect travel companion, with its lightweight and
flexible design.
Power adaptor supplied
Input: AC100 – 240V
Output: DC5V – 2.1A
Note: Only used indoors

Troubleshooting

If in any event that the Aduro facial mask does not perform as intended, please ready the
following information to help identify any problems.
The Aduro facial mask does not come on: Please check that the all plugs are inserted properly.
The Aduro facial mask seems to flicker: Please check that all the plugs are inserted properly.
The Aduro facial mask is hot: This is normal; the Aduro facial mask becomes hot during a
treatment that is designed to open the pores of the skin. If the Aduro facial mask becomes too
hot, please turn off and wait for it to cool down.
Models:
Aduro Single Red
Aduro Single Blue
Aduro 7+1
Disposal
This symbol indicates that batteries must not be disposed of in the domestic waste as they
contain substances which can be damaging to the environment and health. Please dispose
of batteries in designated collection points.
-9-