Download Print this page

Maintenance - Harbor Freight Tools 90857 Assembly And Operating Instructions Manual

Dome tent 6’ x 4’

Advertisement

When taking down the Tent, unzip the Door and Window and first remove the Rainfly
Awning Pole (2). Next, untie the ties attaching the Tent walls and ceiling to the Shock Cord
Poles (1), and remove the assembled Shock Cord Poles (1) from the corners. The Tent will
collapse. Remove the Stakes (7) from the ground (do not pull on the Stake Loops). Place the
Stakes (7) in the Stake Bag (6). Clean and fold the Tent Body (3) and place it in the Tent Bag
(4). Disassemble the Shock Cord Poles (1) and put them in the Pole Bag (5).
Important: To avoid mildew, make sure theTent Body (3) is completely dry before stor-
ing it in the Tent Bag (4).

Maintenance

1. Before each use inspect the general conditon of the Tent. Check for rips or tears, cracked,
bent, or broken parts, loose seams, frayed rods, and any other condition that may affect its
safe operation. If a problem occurs, have it corrected before further use.
Do not use damaged equipment.
2. To clean the Tent Body (3), use only water and a mild detergent. Hang dry. Make sure the
Tent is completly dry before packing into the Tent Bag (4).
SKU 90857
Page 5
90857.p65
5
11/20/03, 2:55 PM

Advertisement

loading