Advertisement
HOW TO USE
•
Press the fan control button (10) to turn the fans (8) on and off.
•
Press the light control button (11) to turn the light on and off.
•
The fans (8) can be rotated individually for premium performance so that any smoke from the
grill can be safely deflected away.
•
The light module (9) rotates for best lighting conditions while grilling at night—adjust as
desired.
BATTERY INSTALLATION AND REPLACEMENT
•
Using a Phillips head screwdriver (not
included), remove screw (12) and lift the
battery compartment cover open (14).
•
Install batteries according to the polarity
drawing indicated. Replace the battery
compartment cover (14). Make sure to
align tabs (13) and tighten screw (12)
securely to close.
NOTE: This product requires 8 x 1.5V "AA"
batteries (not included).
CAUTION – BATTERY SAFETY INFORMATION
•
Do not recharge non-rechargeable batteries.
•
Rechargeable batteries should only be
recharged under adult supervision.
•
Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
•
Old batteries should be removed and replaced.
•
Do not mix old and new batteries.
•
Do not dispose of batteries in fire—batteries may explode or leak.
•
Do not dispose of the BBQ Grill Light & Fan in fire—batteries may
explode or leak.
•
If this product will not be used for an extended period of time,
remove the batteries from the product.
•
The supply terminals are not to be short-circuited.
•
Batteries are to be inserted with correct polarity.
•
Clean the battery contacts and product prior to battery installation.
•
As always, dispose of batteries in an eco-friendly manner.
12. Screw
13. Tabs
14. Battery
compartment
cover
Advertisement
