How To Lock Your Lap And Shoulder Vehicle Seat Belt; Sliding Latch Plate And Switchable Retractor - Graco NAUTILUS SNUGLOCK LX Instruction Manual

How to Lock Your Lap and Shoulder Vehicle Seat Belt

Sliding Latch Plate and Switchable
Retractor
A Latch plate that slides freely on the belt
webbing and cannot, by itself, hold the belt
snug around a car seat.
When installing the car seat and NOT using the
SnugLock system, route the vehicle seat belt
®
through the proper belt path and buckle it in.
Slowly pull the shoulder belt all the way
out to switch it to locking mode. Then, as
you pull the vehicle seat belt tight, feed all the
slack back into the retractor.
Grab the sides of the seat at the belt path and
slide the seat side-to-side and front-to-back. The
seat should not move more than 2.5 cm (1").
95
96