Useful Adjustment Settings; Auto Sync. Adjustment (For Analog Pc Input Mode Only); Fine Sync. Adjustment - Sharp Aquos LC-37D43U Operation Manual

Useful adjustment settings

Auto Sync. adjustment (for Analog
PC input mode only)
For automatically adjusting the PC image.
Press MENU to display the MENU screen, and
1
then press c / d to select "Setup".
Press a / b to select "Auto Sync.", and then
2
press ENTER.
Press c / d to select "Yes", and then press
3
ENTER.
• Auto Sync. starts and "Now adjusting the image."
displays.
Yes
Press MENU to exit.
4
NOTE
• When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if "Completed" displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
• It is not necessary to use "Auto Sync." when a digital signal
is being input, so it cannot be selected.

Fine Sync. adjustment

Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
1
2
3
No
Selected item
H-Pos.
30%
V-Pos.
Clock
Phase
4
5
NOTE
• For resetting all Fine Sync. adjustment items to the factory
preset values, press a / b to select "Reset", and then
press ENTER.
• It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
Press MENU to display the MENU screen, and
then press c / d to select "Setup".
Press a / b to select "Fine Sync.", and then
press ENTER.
Press a / b to select the specifi c adjustment
item.
H-Pos. [ 90] a
V-Pos. [ 39] a
Clock [ 90]
a
Phase [ 20] a
Reset
Description
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
Adjust when the image fl ickers with vertical
stripes.
Adjust when characters have low contrast
or when the image fl ickers.
Press c / d to adjust the item to your desired
position.
Press MENU to exit.
b
b
b
b
31