Advertisement
Mounting the Camera
Note: If you are
mounting the
camera on the wall,
carefully separate
the bracket cover
from the bracket.
Use a flat-head
screwdriver or your
hands and gently pry
open the bracket
cover from the
bracket.
a
Drill a hole on the marked location. Insert an anchor for each of the two holes. Fully
insert the anchors by gently tapping the anchor head with a hammer or rubber mallet.
Place the bracket
cover against the
wall where the
camera will be
mounted and mark
the position of the
screw holes.
1 2
3
b
※ Before installing the camera, determine the best location and angle for the camera,
and then install it.
Match the bracket
cover to the holes on
the wall and fasten
the screws.
Attach the camera bracket to the bracket cover.
5
Adjust the angle of
view.
(Do not use force to adjust.
Unscrew the lever and
adjust accordingly after
checking the position of
the groove, then re-tighten
the lever. )
4 5
6
Advertisement
