Sharp LC-13S2U, LC-15S2U, LC-20S2U Operation Manual page 16

EZ SETUP (WITH AUTO CLOCK SETTING) (Continued)
EZ SETUP during the First Power On (Continued)
BRIGHT
SLEEP PIC. FLIP
ENTER
DISPLAY MENU
AUDIO
MUTE ONLY CC TV/VIDEO
FLASH-
BACK
VOL CH
A
• Do not let the EZ SETUP screen remain unattended for a long time.
• If EZ SETUP does not memorize all the channels in your region, please refer to pages 35 and 36 for more
information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or
the frequency jamming is occurring around the area. Please refer to pages 35 and 36 for more information on
manually memorizing channels using CHANNEL SETTING.
• If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK Setting may not
operate. In this case, a "EDS CH IS NOT AVAILABLE" message will display and the mode will change to MANUAL
CLOCK Setting. Refer to page 19 to set the clock manually.
16
6
Press a/b to select YES, and
press ENTER.
If you want to stop the EZ SETUP
process once it has started, press
c and it will be canceled. If you
ENTER/
want to SET UP again, please refer
a/b/c/d
to pages 35 and 36 on SET UP.
To cancel EZ SETUP
Press a/b to select NO, and
MENU
press ENTER.
The tuner will automatically search
for the broadcasting and cable TV
channels. (The CH No. will
automatically increase when it
appears.)
The TV set will automatically
search for EDS signals.
If EDS signals are received, the
channel number and time will be
displayed, and then the screen
shown in step 7 appears.
7
Once EZ SETUP is completed, the
lowest channel number memorized
will be displayed.
CONNECT ANTENNA OR CABLE.
START EZ SETUP?
YES
NO
SELECT : ENTER : EX I T :
ENTER
PLEASE WA I T
AUTO PROGRAMMI NG
STOP :
PLEASE WA I T
NOW SEARCH I NG T IME
STOP :
<
STEREO ON A I R
SAP
MONO
MENU
2
11 : 53AM