Tightening and Use of Nuts
Care should be taken to not overtighten nuts when used
with thermoplastic threaded rod.
NOTICE
Nuts should be tightened by hand and given half a turn
with a spanner wrench.
NOTICE
It is not recommended to use steel nuts with
thermoplastic threaded rod or bolts.
Property
Tensile strength
Elongation
Modulus of elasticity
Hardness: Rockwell
Hardness: durometer
Flexural strength
Deformation under load 14 N/mm² after 24 hrs. 122 (50)
Impact – Izod Notched at 50% RH
Property
Coefficient of linear thermal expansion
Melting point
Flammability
Coefficient of thermal conductivity
Deflection temperature: at 0.5 N/mm²
Deflection temperature: at 1.8 N/mm²
Table 3. Mechanical Data
PAGE 12 — ECHO BARRIER • USER MANUAL — REV. #0 (09/14/18)
Dry Temp.
Units
°F (°C)
73 (23)
lb-in. (N/mm²)
73 (23)
%
73 (23)
lb-in. (N/mm²)
73 (23)
73 (23)
73 (23)
lb-in. (N/mm²)
%
73 (23)
ft-lb. (J/m)
Table 4. Thermal Data
Units
L/L/°F (10
-6
°F (°C)
Btu foot/hour/ft²/°F
(W/K.m)
°F (°C)
°F (°C)
INSTALLATION GUIDE
Nylon 6.6
.55 – .74 (62 – 83)
20 – 200
15.3 – 24.2 (1,733 – 2,744)
R112 – R120
D80 – D85
.76 – .86 (86 – 97)
1.0 – 3.0
81 (110)
Nylon 6.6
/K)
55.5 (100)
500 (260)
Self-extinguishing
.138 (0.24)
397 (203)
14 (60)