Advertisement
Quick Links
AUTOMOTIVE NITROGEN PRESSURE REGULATOR
• Pressure regulation of Nitrogen (N2)
• Pressure testing refrigeration systems
• Leak-down testing of refrigeration systems
• Purging of refrigeration systems
• Only for use on nitrogen pressure cylinders
1
12
13
14
No.
Description
1.
Cylinder Connection
2.
High Side Gauge of Nitrogen Regulator (input)
3.
Low Side Gauge of Nitrogen Regulator (output)
4.
Output Control Valve
5.
Charging Hose Connection on Regulator
6.
Pressure Regulator T Handle
7.
Leak Testing Gauge Assembly
8.
Connection to Refrigeration System
9.
Leak Testing Ball Valve Lever
10.
Charging Hose Connection on Leak Testing Assembly
11.
Charging Hose
12.
Charging and Testing Manifold (not included in kit)
13.
Low Side Valve on Manifold
14.
Low Side Hose (blue)
15.
Charging Hose (yellow)
16.
High Side Standard R134a 1/4" FL-M x 13mm
Economy Coupler
TECHNICAL DATA:
Connection:
• Model # 53001: CGA580 (US)
Pressure Regulator:
LEAK TESTING KIT
2
15
www.mastercool.com
6
8
16
3
4
5
7
11
9
10
1
Advertisement
Summary of Contents for MasterCool 53010
- Page 1 Charging and Testing Manifold (not included in kit) Low Side Valve on Manifold Low Side Hose (blue) Charging Hose (yellow) High Side Standard R134a 1/4” FL-M x 13mm Economy Coupler TECHNICAL DATA: Connection: • Model # 53001: CGA580 (US) Pressure Regulator: www.mastercool.com...
- Page 2 T handle counter-clockwise, then open the output control valve and close it. The output gauge should read a lower pressure.) • If using the leak testing gauge assembly, turn the red needle to the required refrigerant pressure. www.mastercool.com...
- Page 3 (4). Both gauges should read zero. • Slowly loosen the cylinder connection. There may still be some pressure between the regulator and cylinder. • Completely remove the regulator. • Clean and store the regulator in its box to prevent damage. www.mastercool.com...
- Page 4 53010-AUT-INST...