Audio Menu; Power Control Menu; Treble; Bass - Sharp AQUOS LC-60E88UN Operation Manual

On-Screen Display Menu

Audio Menu

You can adjust the sound quality to your preference
with the following settings.
Example
Audio
a15

Treble

[ 0]
a15

Bass

[ 0]

Balance

[ 0]

Surround

Bass Enhancer

Reset

1
Press MENU to display the MENU screen, and then
press c / d to select "Audio".
Press a / b to select a specifi c adjustment item.
2
• Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item.
Press a / b (or c / d ) to select the desired setting,
3
and then press ENTER.
4
Press MENU to exit.
c button
Selected item
Treble For weaker treble
Bass For weaker bass
Balance Decrease audio from
the right speaker
• Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 30.)
• For resetting all Audio adjustment items to the factory
preset values, press a / b to select "Reset", press ENTER,
press c / d to select "Yes", and then press ENTER.
Surround
The surround function produces Surround effect from
the speakers.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
• You can choose Surround by pressing SURROUND on
the remote control unit. (See page 17.)
• Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 30.)
• For some discs, setup may be required on your DVD
player. In this case, please refer to the operation manual of
your DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
• Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 30.)
b15
b15
R
L
[Off]
[On]
d button
For stronger treble
For stronger bass
Decrease audio from
the left speaker

Power Control Menu

Power control setting allows you to save energy.
Example
Power Control

Power Saving

[Disable]

No Signal Off

[Disable]

No Operation Off

1
Press MENU to display the MENU screen, and then
press c / d to select "Power Control".
Press a / b to select a specifi c adjustment item,
2
and then press ENTER.
Press a / b (or c / d ) to select the desired setting,
3
and then press ENTER.
4
Press MENU to exit.
Power Saving
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", "
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
" " appears on the screen.
Off: This function does not work.
• "Power Saving" does not function when you set AV MODE
to "AUTO" or "DYNAMIC (Fixed)".
• You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
—If you set "OPC" to "On" when "Power Saving" is set
to "Standard", then the "Power Saving" setting will
change to "Advanced".
—When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
• When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture menu screen.
• You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 19.)
No Signal Off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
• "Disable" is the factory preset value.
• When a TV program fi nishes, this function may not operate.
No Operation Off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
• "Disable" is the factory preset value.
[Off]
" appears on the
25