Sharp AQUOS LC-42BD80U Operation Manual page 59

Appendix
Problem
• Still image playback or frame
advance playback does not
work properly.
• Fast forward/reverse (search)
does not work properly.
• Slow playback does not work
properly.
• Cannot play DVD discs recorded
on other equipment.
• The disc is automatically ejected.
• Disc cannot be ejected.
• The TV makes a snapping
sound when starting playback or
loading a disc.
• Pressing MENU does not bring
up a menu.
• A MiniDisc (MD) recorder is
connected to the TV via a digital
link. When recording songs
from a CD onto MD, the track
numbers are incorrect.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: f 4°F to e 140°F ( f 20°C to e 60°C)
• Frame advance playback on discs other than DVD-RW/R (VR format) may not work
properly.
• Some commercially available BD-VIDEO and DVD-VIDEO discs are not compatible
with still image playback or frame advance playback.
• On BD-VIDEO discs, frame reverse playback does not work.
• Depending on the disc and the scene being played, the speed of fast forward may
not be as described in this manual.
• Search across different titles is not possible. Except for audio CDs, the TV will
switch to playback mode for BD and DVD discs.
• At the end of a title, slow playback will be canceled.
• Slow playback across different titles is not possible.
• With BD-VIDEO discs, reverse slow playback is not possible.
• Discs that were not fi nalized on the other equipment may not play in this TV. Finalize
the disc in the recorder that was used to create it.
• Discs in formats not supported by this TV, such as discs recorded with a high-
defi nition digital video camera cannot be played in this TV.
• Discs created on a computer may not play in this TV.
• Make sure that region code on the disc matches that of this TV.
• Make sure that the disc is playable.
• Make sure that the disc is loaded properly. The disc should be loaded with the
playback side facing the back of the TV.
• Take out the disc and clean it.
• Turn power off the main power, and then turn power on again.
After the power indicator has come on, press
the remote control unit.
• If the above steps do not resolve the problem, please contact your dealer or an
authorized service center.
• The TV may sometimes make a snapping sound when starting playback if it has not
been operated in a while.
These sounds are not malfunctions of the TV but are normal operating conditions.
• If a message appears, follow the instructions in the message.
• If the pauses between tracks on the CD are short, the track numbers on the MD
may be different.
• In cases such as when tracks were specifi ed using an on-screen menu, the track
numbers on the MD may be different.
Possible Solution
(EJECT) on the TV or EJECT on
57