Table of Contents
Advertisement
Basic adjustment settings
Adjusts the picture to your preference with the
following picture settings.
Press MENU to display the MENU screen, and
then press 41/1_ to select "Picture".
Press A/Y
to select a specific adjustment
item.
Press 41/1_ to adjust the item to the desired
level.
Press MENU to exit.
,, For resetting all Picture adjustment items to the factory
preset values, press A/T
to select "Reset", press ENTER,
press _1/_ to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
Press MENU to display the MENU screen, and
then press 41/11_ to select "Picture".
Press A/T
to select "OPC".
Press 41/11_ to select "Oil" or "On: Display".
Off
On
On: Display
The brightness is fixed at the value set in
"Backlight".
Automatically adjusts
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
Press MENU to exit,
,, When set to "On", the (}PC senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure nothing obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
,, When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Color
For less color
For more color
intensity
intensity
Tint
Skin tones become
Skin tones become
reddish
greenish
Sharpness
For less sharpness
For more sharpness
,, Select "Advanced" and then press ENTER to set "Color
Temp.", "Black", "3D-Y/C", "Monochrome",
"Film Mode" or
"Range of OPC". See page 28.
O-
27
Advertisement
Table of Contents
