Auto Sync. Adjustment (Pc Input Mode Only); Fine Sync. Adjustment (Pc Input Mode Only) - Sharp Aquos LC G5C32U Operation Manual

Useful adjustment settings
Auto Sync. adjustment (PC input
mode only)
For automatically adjusting the PC image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Auto Sync.", and then
press ENTER.
4
Press c/d to select "Yes", and then press
ENTER.
• Auto Sync. starts and "Now adjusting the
image" displays.
NOTE
• When Auto Sync. is successful, "Auto Sync completed
successfully" displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if "Auto Sync completed
successfully" displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
34
Fine Sync. adjustment (PC input
mode only)
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Fine Sync.", and then
press ENTER.
4
Press a/b to select the specific
adjustment item.
5
Press c/d to adjust the item to your
desired position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press
ENTER.
Selected item
Centers the image by moving it to the left
H-Pos.
or right.
Centers the image by moving it up or
V-Pos.
down.
Clock
Adjust when the image flickers with vertical
stripes.
Phase Adjust when characters have low contrast
or when the image flickers.
Description