Ez Setup; Channel Setup - Sharp Aquos LC 45GD7U Operation Manual

Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the
preset channels.
Language setting
Select from among 3 languages: English, French and
Spanish.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "EZ Setup", and then
press ENTER.
• If you already set the Secret No., go to step 4. If
not, skip to step 5.
4
Input the 4-digit secret number by using 0 – 9.
5
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable" for ANALOG and
DIGITAL (Cable).
6
Press c/d to select "Air", "Cable", for
ANALOG, then press b to move down.
Press c/d to select "Standard", "HRC",
"IRC" for DIGITAL (Cable).
Press ENTER to enter the setting.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one matches
to your TV.
• If cable or antenna connection was selected for
the ANALOG IN terminal at the time when you
set up TV Guide On Screen, the analog settings
cannot be changed afterward. If you need to
change the analog settings, you will have to
change the TV Guide On Screen settings first.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
7
Press c/d to select "Yes" for ANALOG, then
press b to move down.
Press c/d to select "Yes" for DIGITAL (Air),
then press b to move down.
Press c/d to select "Yes" for DIGITAL
(Cable), and press b to move down.
Select "Search Start", and then press
ENTER.
• This operation makes the TV search for both
ANALOG, DIGITAL (Air) and DIGITAL (Cable)
channels.
NOTE
• If no channel is found, make sure what kind of connection is
made with your TV and try EZ Setup again.
• Make sure what kind of connection is made with your TV.

Channel Setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "CH Setup", and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 68 for
setting a secret number.
4
Press a/b to select "Air/Cable", and then
press ENTER.
5
Press c/d to select "Air", "Cable", for
ANALOG, then press b to move down.
Press c/d to select, "Standard", "HRC",
"IRC" for DIGITAL (Cable).
Press ENTER to enter the setting.
NOTE
• Make sure what kind of connection is made with your TV.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one matches to your TV.
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
1
Repeat steps 1 to 3 in Antenna setting in
Channel Setup.
2
Press c/d to select "Yes" for ANALOG, then
press b to move down.
3
Press c/d to select "Yes" for DIGITAL (Air),
then press b to move down.
Press c/d to select "Yes" for DIGITAL
(Cable), and press b to move down.
Select "Search Start", and then press
ENTER.
NOTE
• Make sure what kind of connection is made with your TV.
37