Cord Connections; System Plug Pinouts; Spa Light - Balboa Lite-Leader Series Operation Manual

2-SPEED PUMP CORD CONFIGURATION
The following wiring configuration is for two-speed pump circuits.
System
OZONE CORD CONFIGURATION
The following wiring configuration is for a ozone .
System
Ground
High Speed / Red
Low Speed / Black
Common / White
Ground / Green
Note flat sides in connector
Your control may contain a high intensity, low voltage light
to enhance night time use. This illustration shows how and
where to find the bulb for replacement. It also shows the
mounted spa light with a replacement (colored) lens.
Colored lenses will further the enhancement of the light.
Simply snap on or off to change the mood of your spa.
Wall fitting, reflector and lenses are not included. Spa light
circuit is LED compatible.

Cord Connections

System Plug Pinouts

Low Speed / Black
High Speed / Red
Common / White

Spa Light

Black = Low Speed
Red = High Speed
White = Common
Green = Ground
Black = Hot/Line Black = Hot/Line
White = Common White = Common
Green = Ground Green = Ground
YELLOW:
Ozone
WHITE AMP: Slide/Versi-Heat Control Cord
Not Used
Not Used
Pressure Switch
Pressure Switch
Note flat sides in connector
SpaDepot.com
Pump
Ozone
Common / White
Ground
Hot / Black
12